Health and Safety Feature Library

Operations Engineer's library catalogues editorial features going back five years.

Access to all archive material is free to all, including non-members of IPlantE (the Institution of Operations Engineers) or BES (Bureau of Engineer Surveyors), under the umbrella of SOE (Society of Operations Engineers). However, to discover the many benefits of becoming an SOE member, please click here.

06/04/2020 Sight sensing Motion amplification is a powerful technique for visualising vibration and other motion in mechanical systems, which can lead to rapid diagnosis of potential problems » Read More


08/01/2020 Shaking things up Some analysis tools promise to automate the interpretation of vibration signals to extend the job of collecting data to unskilled trades, instead of just trained experts. OE explores how they work » Read More


07/03/2019 Getting the shakes Vibration signals can identify the condition of a machine’s balance, lubrication, bearings and gears » Read More


01/08/2012 Silence is golden To avoid effects such as occupational deafness and hand-arm vibration, plants must adopt a best practice approach to noisy environments and processes. Steed Webzell reports » Read More


08/08/2011 Sound measures Noise and vibration beyond allowable limits can leave managers on shaky ground. No wonder then these issues are climbing plant engineers' priority lists. Steed Webzell reports » Read More


10/08/2010 Comfort zone Protecting plant employees with state-of-the-art equipment and clothing is both the goal and bane of plant management, as Brian Wall reports » Read More


01/04/2009 Belt and braces Can you recall some of the more extreme reactions from the general public when the idea of compulsory seat belts was first mooted? They ranged from: 'No one can make me put one of those things on' to 'No [expletive deleted] way!' In short, ... » Read More


01/08/2008 Good vibrations Now that both noise and vibration are being seen as less acceptable - thanks to legislation limiting exposure (the Control of Noise (April 2006) and Control of Vibration (July 2005) at Work Regulations) - technology is emerging not only to ... » Read More


01/08/2007 Bad vibrations Now that both the Control of Noise and Control of Vibration at Work Regulations are well and truly in force (April 2006 and July 2005 respectively), plant engineers that haven't yet done so, need to ensure that their areas of ... » Read More


01/08/2006 Measuring up to noise Noise-induced hearing loss can occur to people at low levels of noise. An HSE survey in the 1990s indicated that in excess of two million workers were exposed to noise levels between 80db and more than 142db, averaged over the working day ... » Read More


01/08/2006 Hands-on sensing A novel vibration dose meter is being developed that can be worn on the hand, in order to measure exposure to damaging hand-arm vibrations from machinery. In its present form, it can advise of excessive risk levels and store information ... » Read More


01/12/2005 Smooth a path to silence There shouldn't be any significant problems meeting the requirements of the new noise and vibration regulations, but there are issues which employers need to consider - and they should be wary of figures quoted by some equipment ... » Read More


01/08/2005 Noise and Vibration - Shake, rattle and hum All employers, operators and users of equipment that causes noise and/or vibration need to take very serious notice of the new regulations relating to vibration that come into force on July 6th 2005 and the corresponding noise regulations ... » Read More