A centre of sustainability07 November 2024

DataCenter HMP113 probes hanging in position

A novel sensor system has been developed to help data centres optimise the energy efficiency and sustainability of their operations. Anu Kätkä, product manager at measurement technology company Vaisala describes the technology, which has dramatically reduced cabling requirements and lowered the carbon footprint of building management systems (BMS)

The global demand for data centres is being driven by cloud-based services, AI, automation and digitisation. These data handling facilities house large amounts of IT infrastructure and require high levels of power to run the equipment and to cool it. The latest servers are more energy-efficient and able to operate at higher temperatures. As major consumers of power and land, data centre operators have an undeniable responsibility to aggressively reduce emissions and lessen environmental impacts wherever possible. In addition, data centres frequently contain critically important data and it is not uncommon for 99.999% uptime to be a requirement. The monitoring and control requirements are therefore comprehensive and stringent.

PARTNERS IN INNOVATION

Vantage Data Centers powers, cools, protects and connects the technology of the world’s well-known hyperscalers, cloud providers and large enterprises. Developing and operating across five continents in North America, EMEA and Asia Pacific, Vantage has evolved data centre design in innovative ways to deliver dramatic gains in reliability, efficiency and sustainability in flexible environments that can scale as quickly as the market demands.

Vaisala’s development project was initially prompted by the sustainability requirements of the new Vantage campuses. “We are constantly looking for ways to improve both the efficiency and sustainability of our data centres,” explains Eugenio Lukianov, principal automation manager, EMEA at Vantage Data Centers. “Due to their accuracy and reliability, Vaisala sensors are frequently specified in the requirements of our new or refurbished data centres worldwide. Many of our facilities are large and the sensor cabling requirement can be enormous, so we were keen to find a better solution,” he adds.

Engineers from Vaisala and Vantage found that the amount of cabling required at data centres could be reduced if the sensors could be re-designed to be daisy-chained, rather than each having their own individual cable. A sensor development project therefore progressed with this as its key objective, but additional benefits were also realised by the new sensor solution. “In order to facilitate the daisy-chain, it was necessary for the sensors to be ‘plug and play’ which made installation so much easier,” says Lukianov. “The sensor cables are initially coiled in the roof space and then, once the servers are installed, the sensors are simply dropped into place. This modular approach also simplifies ongoing maintenance because any damaged sensors or cables can be quickly and easily swapped out.”

The cable reduction potential of the daisy-chain solution is very significant. For example, a single 100m data centre aisle, with 30 instruments at 3m spacing, each with a dedicated cable and a 3m cable drop would require about 1,695m of cable – more than a mile! In contrast, if the same aisle is equipped with the daisy-chain solution, the cabling drops to just 187m, representing an 89% reduction in carbon footprint.

ENVIRONMENTAL MEASUREMENTS

One of the key measures of sustainability is power usage effectiveness (PUE), which is derived by dividing total power consumption by the power used to operate the IT equipment. So, the more efficient the data centre, the lower the PUE. “This is an important metric for us – we continuously create downward pressure on this figure with accurate measurements and tight control of the cooling operations,” explains Lukianov.

The sensor daisy-chains at Vantage transmit data to the Vantage servers and the ongoing accuracy of the measurements is essential for the efficiency of cooling. Vaisala sensors are also deployed outside the building, so that outdoor air can be used by economisation to reduce the energy required for cooling and thereby lower the PUE.

In addition to the critical areas of the Vantage data centres, Vaisala sensors are also located in non-critical rooms such as storage areas and offices, providing data for normal HVAC control.

WHY VAISALA?

At Vaisala, we believe that by specifying our extensive range of measurement technologies, data centre customers can ensure that the efficiency of their cooling operations is underpinned by accurate data. However, at Vantage, Lukianov believes that the benefits extend beyond long-term accuracy and energy efficiency. “The modularity of the daisy-chain saves time and money during installation and maintenance,” he reasons. “And, with our partners and system integrators using Vaisala technology, we have been able to reduce the volume of spares and training that are required.”

The daisy chain systems have now been installed for up to two years in UK campuses, and Lukianov is very pleased with Vaisala’s response to his request. Reflecting on performance to-date, he says: “So far, the accuracy has been very good and there have been no complaints from our operational teams.”

Looking forward, Lukianov adds: “The number of organisations looking to use data centres is constantly expanding and all of them want to secure a minimum five-year capacity, so the sector is set for even more growth. We will therefore ensure that more sites benefit from the sensor daisy-chain solution, as our business further embraces sustainability.”

Anu Kätkä, product manager at measurement technology company Vaisala

Related Companies
Vaisala Ltd

This material is protected by MA Business copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.